Plate Beamsplitter 21X17X1MM. 5X. 50R 50T 21X17X1.

( Part Type: Plate )

Review 21x17x1. 50r 50t Plate Beamsplitter Lot 5x. 21x17x1mm

The 50r 50t 21x17x1 plate beamsplitter is a high-quality optical component designed for use in various applications, including spectroscopy, interferometry, and other optical imaging and analysis tasks. This beamsplitter is made from a 50/50 ratio of two different materials, typically a type of dielectric material, which allows it to evenly divide an incoming light beam into two equal-intensity beams, one transmitted and the other reflected.

The plate beamsplitter has dimensions of 21mm by 17mm by 1mm, making it a compact and lightweight component that can be easily integrated into a variety of optical systems. The 21x17mm surface is highly polished and flat, ensuring minimal distortion and scattering of the incoming light beam. The plate thickness of 1mm provides sufficient strength and rigidity, while also minimizing the amount of light loss due to absorption or reflection at the beamsplitter surface.

The 5x 21x17x1mm beamsplitter is designed for operation in the visible and near-infrared spectrum, with a typical wavelength range of 400-1100 nanometers. It has a low reflectance and high transmittance, ensuring that a maximum amount of light is transmitted or reflected, depending on the specific application. The beamsplitter is also highly stable and resistant to thermal and mechanical stress, making it suitable for use in a wide range of environmental conditions.

In summary, the 50r 50t 21x17x1 plate beamsplitter is a versatile and high-performance optical component that can be used in a variety of applications. Its compact size, flat and polished surface, and low reflectance and high transmittance make it an ideal choice for optical systems requiring precise light splitting and minimal distortion.

1. High Transmission Efficiency: The 50R 50T beamsplitter has a high transmission efficiency, which means it allows a large amount of light to pass through, reducing losses in the optical system.

2. Broadband Coating: The beamsplitter has a broadband coating, which means it can split light across a wide range of wavelengths, making it suitable for various applications such as spectroscopy, imaging, and laser systems.

3. High Reflectivity: The 50R 50T beamsplitter has a high reflectivity, which means it reflects a large amount of light back into the system, increasing the signal-to-noise ratio and improving the overall performance of the optical system.

4. Durable Construction: The plate beamsplitter is made of high-quality glass, which ensures durability and resistance to mechanical stress and temperature changes.

5. Easy to use: The beamsplitter is easy to integrate into an optical system, and its flat surface makes it easy to align with other optical components.

1. Limited Size: The size of the beamsplitter may be too large for some applications, limiting the flexibility of the optical system.

2. High Cost: The beamsplitter can be expensive, especially if made of high-quality materials such as BK7 or Fused Silica.

3. Limited Angular Range: The beamsplitter has a limited angular range, which means it may not work well with optical systems that require large angular deviations.

4. Delicate Handling: The beamsplitter is a delicate component, and it requires careful handling to avoid damaging the coating or breaking the glass.

The 50R 50T 21x17x1 plate beamsplitter with 5x21x17x1 mm cubes is a high-quality component that offers excellent performance in various optical applications. Its high transmission efficiency, broadband coating, and high reflectivity make it an ideal choice for applications such as spectroscopy, imaging, and laser systems. However, its size, cost, and limited angular range may be limiting factors for some applications. If the size and cost are not a concern, then the beamsplitter is an excellent choice for improving the performance of an optical system.

If you are looking for a high-quality beamsplitter for your optical system, the 50R 50T 21x17x1 plate beamsplitter with 5x21x17x1 mm cubes is a great option. However, it is essential to consider the size, cost, and angular range of the beamsplitter to ensure that it meets your specific application requirements. If the size or cost is a concern, you may want to consider a smaller or less expensive beamsplitter with similar specifications. Ultimately, the choice of beamsplitter depends on the specific requirements of your optical system and the trade-offs you are willing to make between performance, size, and cost.

Details:

Substrate is 1mm float glass. Surface quality specified but so much better.

Coating front surface dielectric, 50r 50t 5 absolute 550nm and absolute 400 700nm. Edges cut not ground. 1 lot of 5 pieces. Individually packed in tissue lined envelopes.

Expand your lab collection. See attached graphs.

Back surface is bar coated. Have items on hand to experiment, design, invent, research, develop, or just tinker the possibilities are endless with optics.

• $49.00-$130.00

Seller:

• zipcode: 92805
• city: Anaheim, California

General:

• condition: New other see details
• in stock: Yes
• Business & Industrial > Healthcare, Lab & Life Science > Lab Equipment > Lab Lasers & Photonics

Offer:

• best offer: false
• # bids: 0
• Started: January 24, 2015, 3:18 am
• # Sold: 0
• quantity: 5

Payments:

• PayPal

Returns:

• policy: no returns

Shipping:

• type: Flat
• cost: $0.0
• handling: 2 days

Ratings:

1. As described, Thanks 01-19-15
2. Hope to deal with you again. Thank you. 01-17-15
3. you should rename your self thecondemguy . Whats with the complementary condems 01-19-15
4. Hope to deal with you again. Thank you. 01-12-15
5. Very fast shipment and very well packaged! Very good seller ! 01-14-15

Is Similar To:

• Edmund 30mm 50r 18 Optics Plate 50t Beamsplitter 31-414 (39.2% similar) Specifications dimensions mm thickness mm dimensional tolerance mm x surface accuracy surface quality edges cut substrate float glass coating specification surface 1 dielectric, 5 r 550NM construction plate type standard beamsplitter wave length range NM reflection transmission ratio r rhos ...(January 2nd, 2015)
• 50t 1 32x32x1.1mm Plate 5x 50r Lot Beamsplitter (52.1% similar) Expand your lab collection. Individually packed in tissue lined envelopes. Coating front surface dielectric, 50R 50T 5 absolute 550NM and absolute 400 700NM. 32 x 32MM square. Have items on hand to experiment, design, invent, research, develop, or just tinker the possibilities are endless with ...(January 20th, 2015)
• 35x35x1.1mm 50t 1 Lot Plate 50r Beamsplitter 5x (51.1% similar) Individually packed in tissue lined envelopes. Edges cut not ground. Expand your lab collection. I have sold hundreds of these and I'm getting down to only a few dozen more. 35 x 35MM square. Have items on hand to experiment, design, invent, research, develop, or just tinker the possibilities are ...(December 22nd, 2015)
• Edmund Beamsplitter 50t 54-824 Standard mounted Optics 50r Plate (42.9% similar) New in original open package...(January 14th, 2015)
• 441.6 930-51 Newport 930-44 Variable Attenuator Beamsplitter Exit 2 Wave Plate Nm (40.6% similar) Good luck buying. Call Newport 930 51VARIABLE attenuate beamsplitter excellent very good condition. This unit is one of my prized possessions. This is the finest variable beam splitter I have ever worked with...(March 12th, 2016)
• 50x50mm 68.0225 Rolyn Lot 2 2x2 1mm Thick 70 30 30tft Lab Plate Beamsplitter (32.5% similar) Standard shipping prices are only good for the lower 48 states. This unit has been used. Compatibility issues are not considered DOA. All parts, accessories, cables, etc. Please review images thoroughly before purchasing. DOA stands for dead on arrival, meaning that the item did not function ...(July 23rd, 2016)